Flip-up access panels, an unrestricted engine compartment, easy-to-reach grease zerks and many more features make servicing the Tiger Cat® simple, so you can be in the shop less and on the job more.
Torsion-spring suspension seat adjusts to each operator’s weight to provide superior comfort. Seat features full padding, forward/rearward adjustment, a high back, adjustable armrests and an adjustable back angle. The 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
Tiger Eye Advanced Monitoring System
Keep a Real-Time "Eye" on Important System Functions
Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat.
12-Volt Outlet
Keep Your Device Charged and Ready
12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.
Powerful and Efficient Engine Options
|
Product Dimensions
|
48″ Tiger Cat
|
52″ Tiger Cat
|
61″ Tiger Cat
|
| Length |
80″ |
80″ |
80″ |
| Width (chute down) |
60.5″ |
64.5″ |
73.5″ |
| Width (chute in transport position) |
49.75″ |
53.75″ |
62.75″ |
| Height (ROPS folded) |
46.75″ |
46.75″ |
46.75″ |
| Height (ROPS up) |
67.25″ |
67.25″ |
67.25″ |
| Weight |
1,175 lb |
1,175-1,180 lb |
1,257-1,277 lb |
| General |
| Total Fuel Capacity |
9.5 gallons |
| Drive Tires |
24″ x 9.5″-12″ (48″ and 52″)
24″ x 12″-12″ (61″) |
| Caster Tires |
13″ x 6.5″-6″, flat-free |
| Seat |
4-point iso-mounted mid-back mounted on operator-suspension platform |
| Drive System |
| Drive System Type |
Dual Pump and Motor |
| Pumps |
Hydro-Gear 12 cc |
| Motors |
Parker 14.5 ci |
| Forward Ground Speed |
12 mph |
| Reverse Ground Speed |
5 mph |
| Parking Brake |
Foot-operated pedal |
| Deck |
| Cutting Widths |
48″, 52″ and 61″ |
| Type |
Velocity Plus™ |
| Cutting Height |
1″ to 5″ in .25″ increments |
| Deck Lift |
Adjustable foot-operated pedal |
| Construction |
Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2″ of steel. Reinforcement plates at cutter deck spindles. |
| Spindles |
Cast-iron housing with tapered roller bearings. |
| Blade Engagement |
Ogura GT3.5 (250 ft lb)
Adjustable air-gap for extended life. |